Conversion Problem for Zoom (Mugen 1.1) in a Specific Stage

I'm editing some Stages do work with the zoom feature of Mugen 1.1 and it seems to work well in every Stage I tried.

But when I tried it with the Stage "Dry River - Evening" by Roque (Fatal Fury / Real Bout Special) it seems it have a mask when I walk in the stage, even having a sprite big enough to show. It gets foccused on a specific distance from the camera.

I tried to compare with other stages and changed some values, but without success.

Does anybody knows how to fix it?

I usually do like this

this is an example :
;Camara 1.0
[Camera]
startx = 0
starty = 0
boundleft = -176 <- ( adjusts to left the camera)
boundright = 176 <- ( adjusts to right the camera)
boundhigh = -240
boundlow = 0
verticalfollow = 1 ;.5
tension = 50
floortension=88

1- you have to lower the number until the camera adjusts ( boundleft ) and ( boundright )

2- if even then things are still out of the camera .. I usually complete drawing in a way that stays inside the camera

anything you can send pm

CAMARAO wrote:

I usually do like this

this is an example :
;Camara 1.0
[Camera]
startx = 0
starty = 0
boundleft = -176   <- ( adjusts to left the camera)
boundright = 176  <-  ( adjusts to right the camera)
boundhigh = -240
boundlow = 0
verticalfollow = 1 ;.5
tension = 50
floortension=88

1- you have to lower the number until the camera adjusts ( boundleft ) and ( boundright )

2- if even then things are still out of the camera .. I usually complete drawing in a way that stays inside the camera

anything you can send pm  

Thanks @CAMARAO  

I had already changed the bounds, but it was something else.

Fortunately, I discovered the problem, it's those two lines:



Looks fine now